Free estimates from a family-owned electrical contractor. License EC13013906.

Call (727) 258-3346
Call Now
Get a Free Estimate
Free Estimate

Charge at home

EV Charger Installation for Florida Homes and Businesses

An EV charger in your own garage or driveway means you wake up to a full battery instead of hunting for a public plug. We size the circuit to your panel, pull the permit and hand you a station that is ready to use.

5.0 on Google, 100+ reviews
License EC13013906
Family-owned and operated
Free estimates

Free estimate

Tell us what you need

Drawing of a Level 2 EV charger mounted on a garage wall, fed by conduit from above

5.0

Stars from 116 Google reviews (September 2026)

Licensed

Florida Certified Electrical Contractor, License EC13013906, on record with the state DBPR

5

Counties served: Sarasota, Manatee, Hillsborough, Polk and Pinellas

15

Electrical services, from panel upgrades to smart homes, one family team

Small subpanel installed on a shed wall with its cables stapled along the framing

Why a home EV charger beats the public plug

Owning an electric car is a smart choice, but charging it should not eat your evening. Public stations around Tampa Bay are often busy, sometimes broken and rarely close to home. A plain wall outlet works, yet it is slow, and an old outlet on a shared circuit can run hot under a load that lasts all night.

A dedicated EV charger fixes both problems. It sits on its own circuit, sized for the job, and it charges the car while you sleep. You leave each morning with the range you need for work, school runs and the drive to the beach.

We wire them from Venice up to Clearwater and inland toward Lakeland. We are a family-owned team from Parrish, and we treat your garage wall the way we would treat our own.

Signs it is time for a home charger

These are the moments our customers tell us they made the call. If two or more sound familiar, a charger at home will pay you back in time every week.

  • You lose too much time waiting at public charging stations.
  • Your wall outlet takes all night and still leaves the battery short.
  • You want the car ready at home, where charging is easier and safer to manage.
  • A second electric car is coming and both need dependable daily charging.
  • You want your home ready for the next buyer, since more of them now drive electric.

Get an estimate before the new car arrives

Send us a photo of your panel with the door open and one of the spot where you want to plug in. We will tell you what the job needs, free.

Level 1, Level 2 and DC fast charging explained

Charging speed comes down to voltage and the amps the circuit can carry. Here is what each level means for a house.

Level 1 at a standard outlet

The cord that came with the car, plugged into a 120 volt outlet. It adds only a few miles of range per hour, which suits short daily drives. We check that the outlet and its circuit can take a long, steady load.

Level 2 on a 240 volt circuit

What most drivers want at home. It runs on a dedicated 240 volt circuit, like a dryer or a range, and refills a typical commute overnight with room to spare. This is most of the work we do.

DC fast charging for businesses

DC fast chargers need heavy commercial power and utility coordination, so they belong at public stations and some businesses. They are not practical for a house. We will tell you honestly if a site can support one.

Financing

Pay for the Job Over Time

Financing available through Synchrony, subject to credit approval. Ask us about financing options when you call or book your free estimate.

  1. Free written estimateYou know what the job costs before you apply for anything.
  2. Ask when you bookTell us you want to finance and we walk you through the application.
  3. Terms before you signSynchrony shows you the plan terms, and you decide from there.

Financing through Synchrony

Can my panel handle an EV charger

Most homes can take a Level 2 EV charger, but the panel decides how. Before we quote, we look at the main breaker size, the open breaker spaces and what your house already draws on a hot July afternoon with the air conditioning running.

The electrical code treats car charging as a continuous load. That means the circuit has to be rated for more than the charger’s maximum draw, with headroom built in. A unit that pulls 40 amps needs a bigger breaker and wire than 40 amps, and we size both to the maker’s instructions.

If the panel is full or near its limit, there are good answers. Many units can be set to a lower current. A load management device can share capacity with a big appliance. When the panel is old or undersized, panel replacement or a 200 amp upgrade may be the right move, and we explain the choice plainly.

Not sure about your panel? Send us a photo

A clear photo of the panel label and the breakers tells us a lot, whether this is your first electric car charger installation or a second one. We will call you back with what we see and the next step.

How we install your EV charger

Five steps, from the first call to the first full battery.

Meter, disconnects and conduit runs on the side of a home with teal siding
  1. 1

    Look at the panel and the parking spot

    We check your panel’s capacity, where the car parks, how far the cable must run and whether the charger goes indoors or out.

  2. 2

    Choose the charger and the circuit

    We help you pick a plug-in or hardwired unit that suits your car and your panel, and size the breaker and wire to its label.

  3. 3

    Pull the permit

    This circuit is electrical work, so we file the permit with your city or county before any wire is run.

  4. 4

    Install and test

    We mount the unit and run the circuit in the right cable or conduit. Then we set the current limit and test a real session with your car.

  5. 5

    Pass the inspection

    We book the inspection and meet the inspector, then show you the app, the settings and where the breaker lives.

Do you need a permit for an EV charger in Florida

Yes. A new 240 volt circuit for car charging is electrical work, and the Florida Building Code has no exemption for it. The state’s new permit exemption for small projects on single-family homes, the one with a dollar cap, leaves electrical work out entirely.

We handle the paperwork. In unincorporated areas the county building department issues the permit. Cities such as Sarasota, Venice, Tampa, Clearwater and St. Petersburg run their own. Either way we file it, book the inspection and meet the inspector on site.

A permit protects you in plain ways. The inspector checks the breaker, the wire size and the grounding. Your insurer sees a permitted circuit, and a future buyer sees work that was done right.

Hardwired or plug-in: which home charger fits you

A plug-in Level 2 charger connects to a 240 volt receptacle on the wall. It leaves with you when you move, and the receptacle can serve a different unit later. It needs a heavy-duty receptacle rated for the load and, under current code, protection that suits a garage.

A hardwired charger connects straight to the circuit with no receptacle in between. It can often run at a higher current, it has fewer parts to wear out, and outdoor installs are simpler to seal against rain.

For most garages we lean toward hardwired, since it removes a connection that can loosen over years of use. For renters and people who plan to move soon, plug-in often makes more sense. We give you both options with the reasons.

Tell us your car and we will match the unit

Make, model and how far you drive each day is all we need to start. The estimate is free and there is no pressure to book.

Line drawing of the parts inside a breaker panel

Installing a charger outdoors in Florida weather

Not every home has a garage, and plenty of drivers park in a carport or on the driveway. An outdoor EV charger works well here when it is rated for wet locations and mounted where sprinklers and runoff do not hit it all day.

Heat is the other Florida factor. A unit in direct afternoon sun on a west wall runs warmer, and some units lower their output when they get hot. We look at shade, cable reach and a mounting height that keeps the cord off the ground.

Storm season matters too. Lightning and grid switching send surges down the line, and the station is full of electronics. Pairing the install with whole home surge protection at the panel protects it and everything else in the house.

What the day of the install looks like

We arrive in the window we gave you and start with a walk around. You show us where the car parks and which side the port sits on. We confirm the mounting spot and the wire path before a single hole is drilled.

Power to the panel goes off only for the short part of the job when we land the new breaker. We tell you before it happens, so nobody loses work on a computer or leaves the freezer open. Most of the day your lights, fridge and air conditioning keep running.

Before we leave, we vacuum the dust, label the new breaker and walk you through the app. You get the paperwork for the permit, and we let you know when the inspection is booked.

Home charging habits that protect the battery

Carmakers publish their own advice, and it is worth reading. Many suggest a daily charge limit below full for normal driving and a full charge only before a long trip. Your car’s app usually has a slider for this.

Heat is hard on batteries, so a garage or a shaded carport helps in a Florida summer. Plugging in after a drive lets the car manage its battery temperature while it is connected.

Keep the cable coiled on its hook, off the floor where it can be driven over. Check the plug for damage now and then, and call us if the handle ever feels hot or the breaker trips during a session. Those are signs to look at the connection before the next charge.

Questions before you buy? Call us first

Buying a car or a wall unit this month? A short call can save you from the wrong cable, the wrong amperage or a panel surprise.

Charger brands and the Tesla Wall Connector

From Level 2 charger installation for a first car to Tesla Wall Connector installation in a new garage, we install most units sold today, including ChargePoint, Wallbox, Emporia, Grizzl-E and the Tesla Wall Connector. We are not a dealer for any of them, so our advice is about what suits your car and your panel.

Look for a unit that carries a safety listing from a recognized testing lab. ENERGY STAR certified EV chargers also use less power while they sit idle, which adds up over a year.

Many newer cars use the NACS plug that began with Tesla, while others use the J1772 plug. Adapters exist, but it is simpler to buy one with the right cable for the car you drive most.

Smart chargers, schedules and sharing two cars

A connected charger lets you set a schedule, track what you use and cap the current from your phone. Your utility may offer time-based rates, so setting charging for late night can make sense. Ask FPL, Tampa Electric or Duke Energy Florida what applies to your address.

Two electric cars can share one circuit with units that talk to each other and split the power. That often saves a panel upgrade. We set the limits so both cars are full by morning and the breaker never trips.

If you already run smart home controls, many models join the same app, so lights, thermostat and car charging live on one screen.

Chargers for businesses, rentals and HOAs

Offices, shops and rental properties add Level 2 stations for staff, tenants and customers. We look at the service size, the parking layout and how many ports make sense, then wire the circuits and mount pedestals or wall units.

Condo and HOA garages need the association’s approval and often a plan for billing each owner. We can walk the site with the board and explain what the building’s service can support. For other work at your business, see our commercial electrician page.

Plan charging for your business or property

Tell us how many cars, where they park and the size of your service. We will walk the site and put the plan in writing.

Where we install EV chargers

Our state certification lets us work in every Florida county, and we install EV charging in homes across the Suncoast and Tampa Bay. That includes Lakewood Ranch, Parrish, Bradenton, Palmetto, Sarasota, Venice, Sun City Center, Riverview, Brandon, Tampa, St. Petersburg, Largo and Clearwater.

Our Bradenton owners’ guide, EV charger installation near you in Bradenton, covers the Manatee County side in more detail. For every town and county we cover, see our service areas.

Bluefin Power Solutions is a Florida Certified Electrical Contractor, License EC13013906. You can look up the license on the state DBPR record.

Ready to plug in at home

Call us Monday to Friday, 8 AM to 6 PM, or use the estimate form. We will find a visit time that suits your week.

Questions

EV charger questions

Yes. A new charger circuit counts as electrical work, and the state code requires a permit for it. We file with your city or county and schedule the inspection. We are there when the inspector arrives, so you never deal with the building office.

Most can. We check the main breaker, the free spaces and your peak load first. If capacity is tight, a lower current setting, load sharing or a panel upgrade can make it work, and we explain each option before you decide.

Not in practice. DC fast charging draws far more power than a house service provides and needs commercial equipment. It fits public stations and some businesses. At home, Level 2 is the right answer for nearly every driver.

If you drive more than a short commute, usually yes. Level 1 at a standard outlet is slow and can leave you short after a long day. Level 2 refills most daily driving overnight, so the car is ready each morning.

We install ChargePoint, Wallbox, Emporia, Grizzl-E, the Tesla Wall Connector and other listed units. The right one depends on your car’s plug, your panel and whether you want an app. We are not tied to any brand, so the advice stays about your home.

A unit near the panel with an easy wire path is often a single visit. Long runs, outdoor trenching or a panel upgrade add time. Your free estimate lists what the job includes, and the inspection is booked after we finish.

Yes. We use a unit rated for wet locations, mount it clear of sprinklers and runoff, and seal every entry. On sunny walls we look for shade, since heat can make some chargers slow down.

Not always. Units with power sharing can split one circuit between two cars and still fill both overnight. If your panel has room, two circuits are simple too. We lay out both paths in the estimate.

The distance from the panel, the unit’s current, indoor or outdoor mounting, and whether the panel needs work. We see the site, then give you a written estimate for free before anything starts.

Still have a question? Call (727) 258-3346 or email contact@bluefinpowersolutions.com.

Get a Free Estimate

Prefer to talk?
(727) 258-3346

Tell us what you need. We call back Monday to Friday, 8 AM to 6 PM.

Menu