Free estimates from a family-owned electrical contractor. License EC13013906.

Call (727) 258-3346
Call Now
Get a Free Estimate
Free Estimate

Electrical FAQ

Electrical FAQ: Answers From a Licensed Florida Electrician

This FAQ collects the questions our electrician team hears most on the phone, answered in plain words. Can’t find yours? Call (727) 258-3346 and ask a person.

5.0 on Google, 100+ reviews
License EC13013906
Family-owned and operated
Free estimates

Free estimate

Tell us what you need

Drawing of a question bubble and an answer bubble for the electrical FAQ

5.0

Stars from 116 Google reviews (September 2026)

Licensed

Florida Certified Electrical Contractor, License EC13013906, on record with the state DBPR

5

Counties served: Sarasota, Manatee, Hillsborough, Polk and Pinellas

15

Electrical services, from panel upgrades to smart homes, one family team

How is this electrician FAQ organised?

The answers below are grouped the way calls come in: estimates, hours, licenses and permits, panels, generators, EV chargers, repairs and the area we serve. Each group answers the common electrician questions for that topic in a few short lines.

Where a topic needs more room, the answer links to the service page that covers it in full. Everything here is written by the Bluefin team from our own jobs and from Florida’s code and licensing rules. Nothing here is a price, because every home is different and every estimate is free.

Use this FAQ as a starting point, not the last word. A short answer cannot see your panel, your wire runs or what an earlier owner changed. If an answer sounds like your house, call and an electrician will talk it through with you and tell you whether a visit makes sense.

Questions

Estimates FAQ: free quotes and what to expect

Yes. We look at the job and give you a written estimate before any work starts, at no charge and with no obligation. Photos of the panel or the problem area help us prepare for the visit. Ask us about financing options when you call.

Usually not an exact figure. The right number depends on your panel and how far the wire has to run. It also depends on the permit office and what we find behind the cover. A short visit lets us see all of that, and the estimate costs you nothing.

It lists the work and the main parts the number is based on. It says whether a permit is needed and what is left out, such as drywall repair or painting. Our license number is on it too. You can take your time, compare it and call with questions.

Still have a question? Call (727) 258-3346 or email contact@bluefinpowersolutions.com.

Questions

Scheduling and hours

Monday to Friday, 8 AM to 6 PM. On weekdays we also take after-hours emergency calls. We are closed Saturday and Sunday, so weekend requests are answered on Monday. Leave your name and number and we will call you back.

At night on weekdays, yes: Monday to Friday we answer after-hours emergency calls. Weekend calls are not something we can take. Smoke, fire or a fallen utility line come first to 911 or the power company, any day of the week.

It depends on the size of the job and whether it needs a permit or ordered equipment. Small repairs go on the calendar quickly. Panels and generators wait on permit review, and a standby unit may need to be ordered. Spring is a good time to plan backup power, well before storm season starts. You will know the expected timing when we hand you the written estimate.

Still have a question? Call (727) 258-3346 or email contact@bluefinpowersolutions.com.

Questions

Electrician license, Florida permits and code

Search the contractor’s name or license number on the Florida DBPR license search. Ours is Florida Certified Electrical Contractor, License EC13013906, and the record shows its type and status. Florida also requires the license number on every ad a contractor runs, so a missing number is a warning sign.

Most of it does. Panel changes, new circuits, generators, EV chargers and rewiring all need a permit and an inspection. Florida’s new $7,500 permit exemption for single-family homes does not cover electrical work. We pull the permit under our license and meet the inspector.

On our jobs, we do. The permit is filed under our state license with your county or city building office, and we schedule the inspection. Be careful with any electrician who asks you to pull a homeowner permit for work they plan to do themselves. That puts the legal duty for the work on you.

An arc-fault circuit interrupter (AFCI) shuts a circuit off when it senses the sparking of a damaged wire. The code calls for AFCI protection on most 120 volt living-space circuits. That covers bedrooms, living rooms, kitchens, hallways and laundry areas when those circuits are new or extended.

A GFCI outlet watches for current leaking to ground, through water or a person, and shuts off almost instantly. They belong near water: kitchens, bathrooms, garages, outdoor outlets, pools and laundry areas. Press the test button monthly to make sure yours still trips. If it will not reset, or trips for no clear reason, have an electrician check the circuit.

We fix wiring that fails the current code or an inspection, often found during a home sale or after a DIY job. We explain each item, correct it, and schedule a reinspection if the permit office needs one. Our code corrections page covers the common ones.

Still have a question? Call (727) 258-3346 or email contact@bluefinpowersolutions.com.

Drawing of an inspection checklist in front of an open panel

Why do permits matter so much for electrical work?

A permit means a trained county or city inspector checks the work before the walls close up. That second look catches loose connections, the wrong breaker size and missing grounding, the problems that cause fires years later.

It also protects the house on paper. Insurers and buyers ask about open or missing permits, and unpermitted electrical work can stall a sale or a claim. When a job we quote needs one, the permit and the inspection are part of our price. And we are there when the inspector comes.

Questions

Panels, breakers and wiring

Watch for breakers that trip often or will not reset, a warm or buzzing panel, rust inside the box and scorch marks. Lights that dim when big appliances start are another sign. So is an older panel with no room for new circuits. See our panel replacement page.

Consider rewiring for old or damaged wiring, aluminum branch wiring, frequent flicker across rooms, warm switch plates, or a planned remodel. We inspect first and tell you whether repairs will do or a full rewire makes sense. Details are on our home rewiring page.

Lightning and utility switching send surges through the lines, and power strips only guard what is plugged into them. A surge protector at the panel covers the whole house, including the AC, appliances and hard-wired systems. It works well alongside good grounding and point-of-use protectors.

Yes. Under the code edition Florida uses now, new service equipment on a home has to come with surge protection at the service. So we include a surge device in every panel replacement quote. Read how one device guards the house on the whole-home surge protection page.

Still have a question? Call (727) 258-3346 or email contact@bluefinpowersolutions.com.

Have a question that is not on this list

Send it with the estimate form and an electrician will call you back, Monday to Friday, 8 AM to 6 PM.

Questions

Generators and backup power

It depends on what you want running during an outage. We add up the loads you choose, such as the AC, refrigerator, well pump and lights, then size the generator and transfer switch to match. Our home generator installation page explains the choices.

Yes, we install Generac home standby generators. Bluefin Power Solutions is an independent licensed electrical contractor, not a Generac dealer. We handle the electrical side, the transfer switch, the permit and the inspection, and we can coordinate the gas connection.

No. Backfeeding through an outlet can send power down the utility line and injure line workers, and it can harm the wiring in your walls. Use a properly installed transfer switch or interlock with an inlet box. Always run a portable generator outdoors, away from doors and windows.

A standby generator runs a whole house through long outages. Solar with batteries is quiet and clean but usually covers lighter loads for a shorter time. Some homes combine both. The blog post Generators vs Solar weighs both side by side.

Still have a question? Call (727) 258-3346 or email contact@bluefinpowersolutions.com.

Questions

EV charger FAQ

Not always. A Level 2 charger needs its own circuit, and we check your panel’s capacity with a load calculation first. Many homes have room; some need a larger service or a load management device. See our EV charger installation page.

Yes, as long as the charger and its connection are rated for outdoor use and the circuit is protected as the code requires. We place it where the cable reaches your parking spot without stretching across a walkway. Salt air near the coast is one more reason to pick a sealed, outdoor-rated unit.

Level 1 uses an ordinary 120 volt outlet and adds range slowly, which suits short daily drives. Level 2 runs on a dedicated 240 volt circuit and charges several times faster. Most owners who drive every day choose Level 2, and it needs a permit in Florida. We confirm the panel can carry it before we quote.

Still have a question? Call (727) 258-3346 or email contact@bluefinpowersolutions.com.

Questions

Repairs, lighting and smart homes

A breaker trips to protect the wire. Most often the circuit is overloaded, a cord or appliance has shorted, or the breaker itself has worn out. If it trips again right after a reset, leave it off and call an electrician instead of forcing it back on.

If only one lamp flickers, try a new bulb and check the plug. Do lights waver in several rooms at once, or sag each time the air conditioner kicks on? Then suspect a loose connection or a circuit carrying too much. Those can overheat, so have them checked. Our electrical troubleshooting page covers the common causes.

Yes. We run a new circuit or extend an existing one and install a fan-rated box so the fan is held properly. Then we add the switch where you want it. See our ceiling fan installation and lighting installation pages.

Most do. Many older switch boxes have no neutral, so a smart switch may not work there. The fix is new wiring or a model made for no-neutral boxes. We check each box before you buy and wire the switches safely. More on our smart home installation page.

Still have a question? Call (727) 258-3346 or email contact@bluefinpowersolutions.com.

Questions

Service area FAQ

We are based in Parrish and work in Sarasota, Manatee, Hillsborough, Polk and Pinellas counties. See the full list of counties and cities on our service areas page. Our state certification lets us work in every Florida county.

No. Our base is Parrish, FL 34219, and there is no storefront, so the electrician travels to you instead. Call (727) 258-3346 or send the estimate form, and we will set a time to see the job in person.

Yes. Homes make up most of our jobs. We also work for small commercial customers on new lighting, extra circuits and repairs in retail spaces and offices. See how we plan that work around your hours on the commercial electrician page.

Still have a question? Call (727) 258-3346 or email contact@bluefinpowersolutions.com.

Shed interior wired with new cable runs along the rafters and a duplex outlet on the post

What should you ask an electrician before you hire?

Whichever electrician you call, these questions show you quickly who does careful work. Ask them on the phone, before anyone comes out:

  • What is your Florida license number? Then look it up on the DBPR site and check that it is current.
  • Will you pull the permit? The answer should be yes for panels, circuits, generators, chargers and rewiring.
  • Is the estimate in writing? A written scope protects you both and makes quotes easy to compare.
  • What is not included? Drywall patching, painting and gas lines are often left out, so ask.
  • Who does the work? Find out whether the crew works for the company or is hired out.
  • What are your hours? Know when you can reach someone, and what happens if something goes wrong after hours.
  • Will you test it before you leave? Every circuit touched should be switched on and checked with you there.

What does an electrician check on the first visit?

An estimate visit is short, but a good electrician uses it to look past the one thing you called about. On a typical visit we check:

  • The panel. Its age, brand, rating and free space, plus any heat marks, rust or double-tapped breakers.
  • The service. The meter base, the mast and the main breaker size, which set how much the house can carry.
  • Grounding and bonding. The ground rods and the bond to water and gas pipes, which surge protection relies on.
  • The circuit in question. What else shares it, how the wire was run and whether AFCI or GFCI protection is needed.
  • The route. Where a new wire can travel through the attic, walls or conduit with the least disruption.

Which electrician questions come up after a storm?

After a hurricane or a strong summer storm, the calls change. People ask whether a panel that got wet is safe to switch back on. It is not until an electrician has checked it. Salt water in particular keeps corroding metal parts for weeks.

Others ask why the house has power but the AC or pool pump does not. That can be a tripped breaker, a damaged disconnect or a surge that took out a control board. And many owners who sat through a long outage start asking about a standby generator or a proper portable hookup. The answers in the generator group above are the place to start.

Open meter socket with new service conductors landed and a PVC nipple to the disconnect

Is it an emergency, or can it wait for office hours?

Flames, smoke or a sparking panel are for 911 first. A line down in the yard or a meter pulled off the wall goes to your power company. Once the scene is safe, call a licensed electrician.

Heat, buzzing, a burning smell or a breaker that trips the moment you reset it should not wait until next week. Turn that circuit off and call us. Monday to Friday an electrician from our team answers after-hours emergency calls. Saturday and Sunday the office is closed.

A single dead outlet, a flickering bulb or a fan that wobbles can usually wait for a normal weekday visit. For the usual fixes and what each involves, read our electrical repair page.

Where to go next

Every job we do is listed on our electrical services page, with a page for each service. To talk about your own home, use our contact page or the Get a Free Estimate button at the bottom of the screen.

Get a Free Estimate

Prefer to talk?
(727) 258-3346

Tell us what you need. We call back Monday to Friday, 8 AM to 6 PM.

Menu