What size electrical panel do I need? For most homes the answer is an amp rating, commonly 100, 150 or 200 amps, picked from a load calculation rather than a guess. The right size covers everything your home runs at once, plus the loads you plan to add, such as an EV charger, a heat pump or a generator. A licensed electrician adds that up on a site visit. Bluefin Power Solutions, based in Parrish, FL and serving Manatee and Sarasota counties, does that calculation before recommending a panel, so you buy the size your house needs and not the one a sales pitch suggests.
What panel size actually means, in one paragraph
Panel size is the amp rating of the panel and its main breaker. It is the most electric current your whole home can draw at one time before the main breaker trips. It is not the same as the number of breaker spaces. A panel can have plenty of empty slots and still be too small for your loads, or have a high amp rating and no room for another circuit. Both numbers matter, and an electrician checks them together.
Why the size matters for a Parrish homeowner
Parrish and the rest of Manatee County run on air conditioning for much of the year, and the newer homes here often add a pool pump, an electric range, a dryer and a water heater on top of that. All of those draw current at the same time on a hot afternoon. A panel sized for the house you had in 1990 may be struggling with the house you live in now.
The second reason is what you plan to add. An EV charger, a heat pump or a whole-house generator with a transfer switch each ask for their own circuit and their own share of capacity. Our guide on what size whole house generator you need covers one of those loads in detail. Sizing the panel for today only, then adding a charger next year, can mean doing the job twice.
Before you plan an upgrade, it helps to know what the box does. Our page on what an electrical panel does walks through the parts in plain words.

What you get when the size is right
- Breakers that hold under normal use instead of tripping when the air conditioner and the dryer run together.
- Open breaker spaces for the circuits you already know you want.
- Room to add an EV charger or a generator transfer switch without replacing the panel again.
- One permit, one outage and one inspection, instead of repeating them for a second upgrade.
- A clear paper trail for your insurance agent and any future buyer.
Not sure what is behind your panel cover before you pick a size? An electrical safety inspection shows what you are working with.
The mistakes that waste the money
Most panel regrets come from the same few decisions. Each one ends with a second visit, a second permit or a panel that was never the real problem.
- Sizing for today only. If an EV charger or generator is coming, the panel should be sized for it now.
- Buying by the amp number alone. A larger panel does nothing if the service cable and meter base feeding it are the limit.
- Ignoring the breaker spaces. A 200 amp panel that is full still cannot take a new circuit.
- Assuming bigger is always better. A larger panel costs more to install and may trigger a utility service upgrade you did not need.
- Treating it as a weekend project. Work inside a panel and on the service is for a licensed electrician, and a permit and inspection follow it.
If your panel is already giving you trouble, read the signs you need a new electrical panel before you decide on a size.

How Bluefin sizes a panel, step by step
- We come out and look at your panel, your meter and the cable between them.
- We list what your home runs now and what you want to add.
- We run the load calculation and tell you what size the numbers support.
- You get an estimate that says whether the service needs to be upgraded too.
- We file the permit, coordinate with the utility and do the install.
- The inspector signs off before the job is closed out.
The schedule depends on the permit office and the utility more than the install itself. Our post on how long it takes to replace an electrical panel lays out the phases. If you live in Parrish, see our panel replacement in Parrish page, or the full electrical panel replacement service.
Bluefin is a Florida Certified Electrical Contractor, License EC13013906, licensed and insured, and our state certification lets us work in every Florida county. Financing available through Synchrony.
When to call a licensed electrician
Do not open the panel yourself to find out. Call a licensed electrician if you see any of these:
- Breakers that trip often or will not reset.
- A panel that is warm to the touch, buzzes, or smells burnt.
- Rust, moisture or scorch marks on or inside the panel.
- Lights that dim when the air conditioner starts.
- Plans for an EV charger, a generator, a heat pump or a major addition.
- An old panel in a home you are about to buy or sell.
If you smell burning or see smoke, leave the area and call 911 first. Everything else can go on the schedule.
Want to know who would be doing the work? Read about Bluefin Power Solutions and how we run a job.
How to read your panel’s current size without opening it
You can usually find today’s rating in a minute, with the door open and the inner cover left on.
- Look at the main breaker. It’s the larger breaker, usually at the top, and its handle is stamped with a number such as 100, 150 or 200. That number is your panel’s current size.
- Check the label inside the door. It lists the panel’s maximum rating, which can be higher than the main breaker installed in it.
- No main breaker inside? In some homes, often newer ones, the main breaker sits in a box at the meter outside instead.
Take a clear photo of each: the main breaker, the door label and the meter. Those three pictures tell an electrician most of what they need before a site visit. Don’t unscrew the inner cover to look behind it. The wires there stay live even with every breaker off.
What size electrical panel FAQ
How many amps does a typical house need?
Many homes run on 100 to 200 amps, but the right number comes from a load calculation of your actual loads. Homes with central air, an electric range and a pool pump often need more than the minimum.
Is a 200 amp panel enough for a whole house?
For many homes, yes, but not every one. If you plan to add an EV charger, a heat pump and a generator, ask an electrician to run the numbers first.
What is the difference between panel size and the number of breaker spaces?
Size is the amp rating the panel can carry. Spaces are how many circuits it can hold. You need enough of both.
Can I upgrade my panel without upgrading the service?
Sometimes, if the existing service cable and meter base can carry the new rating. An electrician checks this during the estimate.
Do I need a permit to replace an electrical panel?
Yes. A panel replacement is permitted work, and an inspection follows it. Never assume a panel swap is exempt.
Should I size my panel for an EV charger or generator I may add later?
If you know it is coming, yes. Planning for it now avoids a second permit, a second outage and a second inspection.
How do I know if my current panel is too small?
Frequent tripping, no open breaker spaces, and dimming lights when big appliances start are common signs. A licensed electrician can confirm it with a load calculation.
Get a free estimate on your panel size
Send us photos of your panel and your meter, tell us what you plan to add, and we will tell you what size the job calls for. Estimates are free. Request a free estimate and we will get back to you during our hours, Monday to Friday, 8 AM to 6 PM.